Registers the 200 largest shock events in the X, Y, Z direction
Saves up to 10 curve progressions of the largest shocks
Intelligent signal filtering and evaluation
Indicates limit value overruns with alarm LED
Continuous temperature recording
Intuitive operation, extremely long and independent operating time
Communication via USB
Easy configuration and evaluation with license-free PC software
Configurable recording time over start-stop time
Easy mounting with adhesive pad, screws or magnetic feet
Product description:
High-sensitivity devices, e.g. large, superconducting magnets in medical technology, need a safe and demonstrable protection during transport or during storage.
The compact MONILOG® MicroShockDetector provides the best services.
It is smaller than a smartphone and weighs only 180 grams.
The measuring device reliably stores all data on shocks of every dimension, assigns them to acceleration classes, provides curve progressions and reports alarms as soon as limit values are exceeded.
In addition, the temperature is monitored.
The switch-on time of the MicroShockDetector is easy to configure.
All data can be read out via the USB port, transferred to a PC and evaluated.
The device is quickly installed and dismantled with adhesive pads, screws or supplied magnetic holding feet.
Due to the good economic and ecological parameters, the data logger can also be used only once.
×
We are looking forward to your message
This MONILOG® RISK LOGGER may interest you
Our recommendation:
MONILOG®
MicroShockDetector
Small lightweight shock data logger with intelligent signal filtering and evaluation. Indicates limit value overruns with Alarm LED.
Technical data:
Housing
Plastic housing with stainless steel base
Operation and storage conditions
-40°C to +65°C, max. 98% rel. humidity
Data memonry / Time
Receipt of measuring data independent of battery status for a minimum of 10 years
Display and operating elements
1 button for status indicator, ON/OFF switching with password protection
Temperature
-40°C to +65°C ±1 K, 100,000 measurement values
Conformity
Device certification according to CE, UKCA, IC, FCC, RoHS, REACH, WEEE; Use according to IEEE C 57.150-2012
Programmable parameters
X, Y, Z registering threshold, X, Y, Z alarm threshold, minimum shock duration, temperature-measurement interval; Start-Stop time (switch-on time period), password protection by means of free Windows software
Shock Measurement
200 data records with the highest space vector amplitude, of which the 10 highest values with a curve-plots over 4 s, resolution 2 ms
Connections
Mini USB 2.0
Power Supply
1 replaceable lithium cell, 3.6 V type LR06 (AA, Mignon), lithium content ~0.7g, runtime typically 3 years in switch-on time period (depending on the device configuration)
Acceleration sensor
3D-MEMS, measuring range ±8 g, 10 mg resolution, accuracy: ±(0.2g and 2% measurement value), registering threshold from 0.25g, lower limit frequency 1 Hz, upper filter limit frequency 25 Hz fixed-adjusted
Shock classification
Subdivision of shocks according to space vector amplitude into classes, number of shocks not limited >0.25 g, >0.5 g, >1 g, >1.5 g, >2 g, >3 g, >4 g, >5 g
Indication
2 LEDs for status and alarm limit-value overshooting
Dimensions
106 x 48 x 33 mm (LxWxH), 126 x 48 x 40 mm (LxWxH with magnetic feet)
Weight
approx. 172 g (258 g total if mounted on magnetic feet)
